Yamaha FZ 25 - Specifications, Images, Color Varients & Much More - Vinayakmotors

FZ-25

  • FZ-25
  • FZ-25
  • FZ-25
  • FZ-25
ENGINEDIMENSIONSCHASSISTab titleDESCRIPTION

Engine type
Air cooled, 4-stroke, SOHC, 2-valve
Displacement
249cc
Bore & stroke
74.0×58.0mm
Compression ratio
9.8:1
Maximum horse power
20.9PS/8000rpm
Maximum torque
20.0N.m/6000rpm

Overall Length
2015mm
Overall Width
770mm
Overall Height
1075mm
Seat Height
795mm
Wheelbase
1360mm
Minimum ground clearnce
160mm
Weight(with oil & a full fuel tank)
148kg
Minimum turning radius
2.5m

Frame type
Diamond
Tubeless tire size(Front)
100/80-17M/C 52P Tubless
Tubeless tire size(Rear)
140/70-17M/C 66S Tubless
Brake Type(Rear)
Hydraulic single disc brake
Brake Type(Front)
Hydraulic single disc brake
Diameter of brake disk(Front)
282mm
Diameter of brake disk(Rear)
220mm
Suspension type(Front)
Telescopic fork
Suspension type(Rear)
Swingarm (Monocross)

Fuel Tank Capacity
14L
Carburetor type/Fuel Supply
Fuel injection
Clutch type
Wet,multiple disc
Transmission type
Constant mesh,5-speed
Shift type
Return
Shock absorber assembly type(Front & Rear)
Coil spring/Hydraulic Damper
Hydraulic bulb type
LED
Headlight
LED
Auxiliary light
12V,5W x 1
Brake/Tail light
LED
Turn signal light(Front & Rear)
12V,10W x 2
Fuel gauge
Digital
Clock
Digital
Speedometer
Digital
Fuel consumption indicator
Equipped

The All New Yamaha FZ-25 Ride the Force Within

The design emphasizes both the senses of forward mass layout and downforce, evoking the powerful muscles of an athlete. This newly launched street model delivers riding enjoyment as well as excellent fuel efficiency and environmental performance.

Powerful Mid-Class Street Fighter
The all-new FZ25 has been developed with a newly designed air-cooled, 249 cc, 4-stroke, SOHC, 2-valve, single-cylinder, high-torque fuel-injected engine on a lightweight frame (148 Kgs) enabling the joy of control as the rider intends. These features establish the FZ25 as a powerful, mid-class, street fighter.

FZ-25 Technology
The Proven Engine for Street Bike
249cc Air Cooled
4 Stroke Single-cylinder Engine
The FZ25 mounts a 249cc air-cooled 4-stroke, single-cylinder, SOHC, fuel-injected engine. Based on a reliable 250cc single-cylinder engine proven on sport bikes for the Japanese market, the FZ25’s engine has been fine-tuned and optimized for the Indian traffic, primarily in the intake/exhaust system and the ignition system. The 74 × 58 mm bore × stroke, hemispherical combustion chamber and 9.8:1 compression ratio give this engine its maximum power output at 8,000 rpm and maximum torque at 6,000 rpm.

Midship Muffler
A midship muffler, with its advantages of mass concentration, weight reduction and shorter length, is adopted. The resulting exhaust note communicates the euphoric joy of motorcycling to the rider while sending a distinct sound filled with presence to the surroundings.

Stare-back Headlamp
Bright, energy-efficient LED lights are adopted for the headlight, Tail Light and brake light. The LED lighting is characterized by its design for optimal illumination, especially the low-beam headlight. The headlight is a three-light type: two for the low beam and a third one below that comes on with the other two for the high beam.

Superb Suspension for Enhanced Control
The rear suspension is a lightweight link-less Monocross suspension unit and it is also tuned for a good balance between the spring rate and damping force. It provides 120 mm of wheel travel to keep the tyre in contact with the road, even on rougher road surfaces. The spring is a dual-rate type that provides a good combination of functionality and shock-absorbing performance.

LED Tail Light
The sharp LED Tail Light creates a strong first impression the moment you look at it.

Disc Brakes
The 282 mm diameter front disc is coupled with brake pads using a new material (2-pot brake caliper) for good initial bite while also having minimal change in feel in wet conditions. The brake lever is also newly designed for ease of grip and helps provide linear braking force in response to the amount of input. In the rear is a 220 mm disc brake with a single-pot caliper.

Aggressive Seat Position
Separate seats with slip-resistant cover material have been designed with a balance of shape, cushion thickness and other elements to ensure both a good feeling of fit for the rider and onboard comfort for the tandem passenger. The front portion of the tandem seat has a small bulge to bring a good feeling of hold even during acceleration and deceleration. The sitting point on the tandem seat is about 12 cm higher than that of the rider’s seat to provide good forward visibility for the tandem passenger.

 

Leave your comment

Your email address will not be published. Required fields are marked *

Included Taxes & Checkup

Specifications

2018
New
silver
black
Automatic
FWD
 

NEED A HAND TO FIND YOUR DREAM BIKE?

Contact Us